Box Stock and Pro Indy Rules below

​Box Stock Indy
CHASSIS
  • JK C33 wide Indy chassis in stock configuration.
  • .047 ride height.
 
MOTOR
  • Hawk 7, Hawk Retro, Eagle, and Eagle Retro.
 
GEARS
  • Any brand 10/37.
  • Angled pinions allowed. NO angled spurs.
 
TIRES
  • Stock JK fronts .375 x .750 min.
  • Any rear, NO waffled rims.
  • Can cut, true, narrow tires.
  • NO coning or coating of fronts.
  • 83 mm wide (3.25”).
 
AXLE & OILITES
  • Any solid hardened steel axle.
  • Any non-adjustable oilites.
 
BODY
  • JK F1/Indy wide body ONLY- JK 6113 B.
  • Must be painted w/ 3 numbers.
  • Can use floating body pins.
  • Can reinforce body.
 
Any brand
  • Guide flag, lead wires and braid.
 
ONLY modifications allowed
  • Tape chassis.
  • Open motor bracket holes for better gear mesh.
  • May solder motor to original motor bracket.
  • May notch motor to clear axle.
  • Can add floating body pins.
 
IF IT IS NOT LISTED, IT IS NOT ALLOWED!!

Indy Pro
CHASSIS
  • JK C33 wide Indy chassis in stock configuration.
  • .047 ride height.
 
MOTOR
  • Hawk 7, Hawk Retro, Eagle, Eagle Retro and Pro-Slot 4002FK/Scorpion.
 
GEARS
  • 10, 11 or 12 tooth pinion.
  • Angled pinions allowed. NO angled spurs.
  • Open Spur
 
TIRES
  • Stock JK fronts .375 x .750 min.
  • Any rear, NO waffled rims.
  • Can cut, true, narrow tires.
  • Can cone and/or coat front tires.
  • 83 mm wide (3.25”).
 
AXLE & OILITES
  • Any solid hardened steel axle.
  • Any oilites are allowed.
 
BODY
  • JK F1/Indy wide body ONLY- JK 6113 B.
  • Must be painted w/ 3 numbers.
  • Can use floating body pins.
  • Can reinforce body.
 
Any brand
  • Guide flag, lead wires and braid.
 
ONLY modifications allowed
  • Tape chassis.
  • Independent fronts.
  • Open or cut motor bracket for better gear mesh (as long there is a portion of motor bracket left.
  • May solder motor to original motor bracket.
  • May add a 1” motor bracket.
  • May notch motor to clear axle.
  • Can add floating body pins.
 
IF IT IS NOT LISTED, IT IS NOT ALLOWED!!