- BODY
- Outasight T-Bird.
- Outasight Monte Carlo.
- Painted with hood sponsor and 3 numbers.
- 1/8” front & rear bumper.
- Clear windows.
- Front wheel stickers.
- Painted 3D interior, 3 color minimum.
- Body, interior & decals MUST be bought from Mach 1.
- Motor
- Unaltered Pro-Slot 4002FK or Scorpion, with 11 or 12 tooth pinion and open spur, 64 pitch ONLY.
- NO modifications except for-
- May change or alter brushes and/or springs.
- May solder can bearing.
- May apply fingernail polish to seal.
- May apply CA to magnets.
- Seal MUST be covering at least 2 can screws and unbroken.
- NO removing seal & sticking back on can.
- Tech director discretion if seal is acceptable.
- CHASSIS
- Can use any commercial 4 inch chassis that is or was in production.
- NO home made chassis.
- Rear tires must be black rubber, maximum .810 width and maximum .615 hub.
- Outasight T-Bird.
- Outasight Monte Carlo.
- Painted with hood sponsor and 3 numbers.
- 1/8” front & rear bumper.
- Clear windows.
- Front wheel stickers.
- Painted 3D interior, 3 color minimum.
- Body, interior & decals MUST be bought from Mach 1.
- Motor
- Unaltered Pro-Slot 4002FK or Scorpion, with 11 or 12 tooth pinion and open spur, 64 pitch ONLY.
- NO modifications except for-
- May change or alter brushes and/or springs.
- May solder can bearing.
- May apply fingernail polish to seal.
- May apply CA to magnets.
- Seal MUST be covering at least 2 can screws and unbroken.
- NO removing seal & sticking back on can.
- Tech director discretion if seal is acceptable.
- CHASSIS
- Can use any commercial 4 inch chassis that is or was in production.
- NO home made chassis.
- Rear tires must be black rubber, maximum .810 width and maximum .615 hub.